-
90% Zinc Rich Primer
An extremely heavy duty, anti-corrosive coating, which is ideal for extending the life of steelwork. A form of cold galvanising, this product has been awarded “Best Buy” in Practical Classics magazine.
Benefits:
• Contains metallic zinc pigment that offers sacrificial protection of the steel
• Excellent adhesion to steelwork
• Can be overcoated with conventional oxidisable and chlorinated rubber systems
• Suitable for use in areas where high corrosion is expected
• Fast drying for rapid handling
• Available in white.Application- Airless Spray
- Brush
- Spray
-
Acrylated Rubber Zinc Phosphate Undercoat - Airless Spray Grade
A primer designed for use on blast cleaned steel or blast cleaned zinc sprayed steel and for use under an acrylated rubber top coat. The complete system provides excellent protection under severe conditions.
Benefits:
• Easy to apply
• Protective qualities.Application- Airless Spray
-
Acrylated Rubber Zinc Phosphate Undercoat - Brush Grade
A primer designed for use on blast cleaned steel or blast cleaned zinc sprayed steel and for use under an acrylated rubber top coat. The complete system provides excellent protection under severe conditions.
Benefits:
• Easy to apply
• Protective qualities.Application- Brush
-
Epoxy Zinc Phosphate Fast Cure Sheen Primer
Twin Pack
A two-pack non toxic primer for application to blast cleaned steel or to steel which is clean and free from scale and/or rust. It is especially suitable where gloss hold-up of the top coat is required. It may be used as a blast primer, full coat and over other two pack primers.
Benefits:
• Non toxic Primer
• Available in White, Red, Grey or Buff.Application- Airless Spray
- Brush
- Spray
-
Etch Primer
Single Pack
This etch primer is designed specifically for adhesion to aluminium with an extremely smooth surface.
Benefits:
• Provides extremely good protection on aluminium or zinc
• Hard Dry in 50 minutes.Application- Airless Spray
- Spray
-
High Solids Epoxy Primer
Twin Pack
A twin pack anti corrosive primer used on blast cleaned steel or on steel which is clean and free from scale and rust. It is especially suitable where gloss hold up of the top coat is required.
Benefits:
• Iso-cyanate free better for the environment and applicator
• Can be applied to clean non shot blasted steel
• Formulated for use in low temperature curing ovens
• Formulated to give good gloss hold up of top coat
• Exceptional weather and chemical resistance
• Low VOC content
• Available in pale grey or beige.Application- Airless Spray
- Brush
- Spray
-
Oxide Primer
A quick drying, heavy duty primer which is available in red oxide and grey colours.
Benefits:
• Contains Zinc Phosphate for corrosion protection of the steelwork
• High covering power
• Flash point above 32 degree centigrade
• Can be used where force drying is required (up to 70 degrees centigrade)Application- Airless Spray
- Brush
- Spray
-
Polyurethane Undercoat - Brush Grade
This product has exceptional chemical, solvent and weather resistant qualities.
Benefits:
• Exceptional chemical and solvent resistance
• Exceptional weather resistance
• Exceptional mechanical film properties
• Mixing ratio of 3/1 by volume
• Available in White and a limited range of colours
• Easy to Apply.Application- Brush
-
Polyurethane Undercoat - Spray Grade
This product has exceptional chemical, solvent and weather resistant qualities.
Benefits:
• Exceptional chemical and solvent resistance
• Exceptional weather resistance
• Exceptional mechanical film properties
• Mixing ratio of 3/1 by volume
• Easy to Apply.Application- Spray
-
Quick Drying Eggshell Finish Primer
A rapid drying, eggshell primer which is designed for the longer term protection of steelwork. The product offers a very strong bond between the primer and the metal surface and is ideal for use with our Quick Drying Polyurethane Gloss top coat.
Benefits:
• Contains Zinc Phosphate for corrosion protection of the steelwork
• Excellent adhesion to steelwork
• Can be overcoated with conventional oxidisable and chlorinated rubber systems
• Can be used where force drying is required (up to 70 degrees centigrade)
• Available in Pale grey, Red oxide and Buff
• Fast drying for rapid handling.Application- Airless Spray
- Brush
- Spray
-
Rust Bonding Primer
A water based “rust convertor” primer which is used on the most corroded steel work to bond rust back to steel.
Benefits:
• Fast drying for rapid handling
• Water based low odour
• Unique bonding properties which allow application over tightly adherent rust
• Wide continuous dry temperature resistance
• Can be applied to damp steel
• Non toxic.Application- Brush
-
Supercote Primer Undercoat
The ideal, all round primer and undercoat specifically designed for use with our Supercote Enamel Gloss top coat. Suitable for use on ferrous metal, and many other surfaces.
Benefits:
• Contains Zinc Phosphate for corrosion protection of the steelwork
• Eggshell finish to improve gloss hold up of Supercote enamel
• Flash point above 32 degree centigrade
• Can be used where force drying is required (up to 70 degrees centigrade)
•Available in White, Buff, Pale grey, Mid grey and Red oxide.Application- Airless Spray
- Brush
- Roller
- Spray
-
T-Wash Mordant Solution
A specially formulated acid based solution for the pre-treatment coating of new galvanised surfaces prior to application of standard paint system. This product ensures excellent paint adhesion to the surface.
Benefts:
• Blue solution, turning dark grey after application
• Provides a good key for paint.Application- Brush
-
Water Based Blast Primer - High Solids
This water based primer is a low odour product and is for use on mechanically or blast cleaned steel. With rapid drying and re-coating time this is a very popular and reliable primer with excellent resistance to abrasion, impact, rust and water.
Benefits:
• Very good resistance to abrasion, impact, corrosion and water
• Water based, low odour
• Rapid drying
• Rapid recoating
• Rapid Overcoating.Application- Airless Spray
- Brush
- Spray
-
Water Based Metal Primer
Woco water based primer is an eggshell sheen metal primer free from zinc and heavy metal pigments for use on mechanically or blast cleaned steel as a shop primer.
Benefits:
• Fast drying for rapid handling
• Fully weldable if applied at less than 25 microns DFT
• Water based Non-toxic & low odour
• Excellent adhesion • Eggshell sheen
• Available in red oxide and grey.Application- Airless Spray
- Brush
- Spray
-
Zinc Phosphate Primer QD HB
A highly effective, premium quality, rapid drying primer for the protection of steelwork. It is anti-corrosive, with excellent adhesion to steel work and gives an extremely strong matt finish on metal surfaces.
Benefits:
• Contains Zinc Phosphate for corrosion protection of the steelwork
• Excellent adhesion to steelwork
• Can be overcoated with conventional oxidisable and chlorinated rubber systems. Can be used where force drying is required (up to 70 degrees centigrade)
• Available in Pale grey, Red oxide and Buff.Application- Airless Spray
- Brush
- Spray