10 Items

per page
Set Descending Direction
  1. Woco Marine Gloss

    Single Pack

    A high gloss finish for application to superstructures, topsides, masts and deck fittings. Non yellowing and highly resistant to sunlight and salt spray this paint can also be used for the interior of the craft.

    Benefits:
    • Lead free pigmentation
    • High gloss finish 85% minimum at 20° reflectance
    • Flash point above 32°C
    • Non-yellowing
    • Available in Eggshell, satin and semi-gloss finishes
    • Available in a full range of BS4800, BS381C & RAL shades.

    TDS 230
    Application
    • Airless Spray
    • Brush
    • Roller
  2. Woco Polyurethane Enamel

    Twin Pack

    A twin pack premium quality, high gloss coating. This product is extremely tough and durable and has excellent gloss retention properties and is ideal for use on all marine vessels.

    Benefits:
    • Exceptional chemical and solvent resistance
    • Exceptional weather resistance
    • Exceptional mechanical film properties
    • Mixing ratio of 2/1 by volume
    • Exceptional weather and chemical resistance
    • Available in White and range of BS and Ral shades.

    TDS 451
    Application
    • Brush
    • Roller
  3. Woco Traditional Anti Fouling

    Designed for vessels with a maximum speed of 25-30 knots this economical protection is suitable for domestic and commercial vessels with steel, wood or GRP hulls and for use in either salt or freshwater. It contains a high level of copper oxide to achieve good antifouling properties. It is recommended that our Metallic Barrier primer is used underneath this product.

    Benefits:
    • Contains a high level of copper oxide
    • Holds H.S.E Approval No 9938
    • Available in Red, Black, Green, Blue and Light Grey
    • Fast immersion times
    • Maximum immersion time 3 months if shrouded from direct sunlight.

    TDS 216
    Application
    • Brush
    • Roller
  4. Woco Marine Undercoat

    Single Pack

    An alkyd based undercoat for use on primed or properly prepared, previously painted surfaces under Woco Marine Gloss Paint TDS 230. It dries to a matt finish a range of colours to suit the gloss range. Designed for use on primed surfaces of metal, aluminium or wood, this is the ideal undercoat for Marine Gloss topcoat.

    Benefits:
    • Lead free pigmentation
    • High degree of opacity
    • Flash point above 32 degree centigrade
    • Non-yellowing.

    TDS 229
    Application
    • Airless Spray
    • Brush
    • Roller
  5. Woco Yacht Varnish

    Single Pack

    A flexible clear wood varnish with UV filtration properties. Heritage approved this varnish is suitable for a whole range of wooden marine applications. A rapid drying colourless varnish which dries to a tough durable film with outstanding gloss retention.

    Benefits:
    • Resistant to sun, fresh and sea water, petrol and lubricating oils
    • Can be used on bare wood or for re-varnishing.

    TDS 235
    Application
    • Brush
  6. Woco Non-Slip Deck Paint

    Single Pack

    A material designed for use on steel or wooden decks over an appropriate hard drying primer. It exhibits a tough hard film with a non-slip surface and shows a high degree of resistance to wear. This heavy duty paint gives outstanding hardness and abrasion resistance and is designed for use where heavy traffic, chemicals, detergents and many other solvents are used.

    Benefits:
    • Lead free pigmentation
    • High degree of opacity
    • Flash point above 32 degree centigrade
    • Non-yellowing.

    TDS 226
    Application
    • Brush
    • Roller
  7. Woco Underwater Barrier Primer

    Single Pack

    Metallic Barrier Primer is based on a modified Chlorinated rubber binder for use on wood and steel. It is suitable as an underwater primer over prepared steel and a barrier coat under anti-fouling systems.

    Benefits:
    • Contains Aluminium pigment for excellent barrier properties
    • Excellent adhesion to steelwork
    • Can be overcoated with conventional oxidisable and chlorinated rubber systems
    • Suitable for underwater applications
    • Fast drying for rapid handling.

    TDS 610
    Application
    • Brush
  8. Woco Bilge paint

    Single Pack

    This is a super chemical resistant alkyd gloss paint for use on both commercial and pleasure craft vessels. It can also be used for lockers and bulk heads. Standard colour grey green.

    Benefits:
    • High gloss
    • Dries to a hard adherent film.

    TDS 378
    Application
    • Brush
    • Roller
  9. Woco Universal Anti Fouling

    Our Universal Anti fouling paint is based on a modified composition containing a high level of copper thiocyanate which provides good antifouling properties. Suitable for domestic and commercial vessels with aluminium, steel, wood or GRP hulls. This product can be used on vessels that will be immersed in salt or freshwater.

    Benefits:
    • Contains a high level of copper thiocyanate
    • Holds H.S.E Approval No 9937
    • Available in White, Black, Blue and Red
    • Fast immersion times
    • Maximum immersion time 3 months if shrouded from direct sunlight
    • Can be used on Aluminium hulled vessels.

    TDS 612
    Application
    • Brush
    • Roller
  10. Woco Vinyl Tar

    Single Pack

    A highly acidic and alkali resistant paint which in combination with coal tar pitch gives an extremely high build film, which will provide long term protection to steel and concrete.

    Benefits:
    • Flexible
    • Suitable for immersion conditions
    • Can be applied to a wide range of substrates
    • Film thickness of up to 125 microns DFT can be achieved by airless spray
    • Fast surface dry
    • Provides a good waterproof barrier.

    TDS 406
    Application
    • Airless Spray

We're here to help! We're here to help!

 

10 Items

per page
Set Descending Direction