Industrial Undercoats and Primers

Applying the correct primer or undercoat is crucial to ensure good adhesion and long lasting protection for the finished coating. Our range of industrial undercoats and primers come with extensive options such as quick drying, zinc free and water based products for a whole range of metal applications.

Supercote Primer Undercoat
The ideal, all round primer and undercoat specifically designed for use with our Supercote Enamel Gloss top coat. Suitable for use on ferrous metal, and many other surfaces.
TDS 371
Application:

Zinc Phosphate EC Primer
An extremely quick-drying, anti-corrosive primer which is designed specifically for structural steelwork applications. Available in red oxide, grey and buff colours.
TDS 345
Application: 

90% Zinc Rich Primer
An extremely heavy duty, anti-corrosive coating, which is ideal for extending the life of steelwork. A form of cold galvanising, this product has been awarded “Best Buy” in Practical Classics magazine.
TDS 117
Application: 

Zinc Phosphate Primer QD HB
This is a premium quality, anti-corrosive and quick drying primer, which gives a strong matt finish on metal surfaces. Available in red oxide, grey and buff colours.
TDS 174
Application: 

Oxide Primer
A quick drying, heavy duty primer which is available in red oxide and grey colours.
TDS 173
Application: 

Water Based Blast Primer
This water based primer is a low odour product and is for use on mechanically or blast cleaned steel. With rapid drying and re-coating time this is a very popular and reliable primer with excellent resistance to abrasion, impact, rust and water.
TDS 569 Standard
Application: 
TDS 576 High Solids
Application: 

Quick Drying Eggshell Finish Primer
A rapid drying, eggshell primer which is designed for the longer term protection of steelwork. The product offers a very strong bond between the primer and the metal surface and is ideal for use with our Quick Drying Polyurethane Gloss top coat.
TDS 600
Application: 

Quick Drying Eggshell Finish Primer - Zinc Free
All the benefits of our water based blast primer - without the zinc. Quick drying and excellent resistance to abrasion impact, rust and water.
TDS 578 Standard
Application: 
TDS 583 High Solids
Application: 

Etch Primer – Single Pack
This etch primer is designed specifically for adhesion to steelwork with an extremely smooth surface, also hard to coat surfaces such as galvanised steel
and aluminium.
TDS 133
Application: 

Etch Primer – Twin Pack
This etch primer is designed specifically for adhesion to steelwork with an extremely smooth surface, also hard to coat surfaces such as galvanised steel
and aluminium.
TDS 509
Application: 

Epoxy Zinc Phosphate Fast Cure Sheen Primer
A twin pack non-toxic Primer which can also be used as a blast primer, full coat and over the other twin pack primers. This products should be used on blast cleaned steel or steel which is clean and free from scale or rust. Available in White, Red, Grey or Buff.
TDS 590
Application: 
Brush (small areas only)

Twin Pack High Solids Epoxy Primer
A twin pack anti corrosive primer used on blast cleaned steel or on steel which is clean and free from scale and rust. It is especially suitable where gloss hold up of the top coat is required. Available in White, Red, Grey or Buff.
TDS 608
Application: 
Brush (small areas only)

Epoxy High Build Undercoat
This product is designed for maximum protection with the minimum number of coats. It can be applied directly to blast cleaned and primed metals. With outstanding chemical and abrasion resistance, this undercoat is recommended on steel structures exposed to highly corrosive environments.
TDS 484
Application: 

Acrylic Bond Primer
A water based “rust convertor” primer which is used on the most corroded steel work to bond rust back to steel.
TDS 325
Application: 

Polyurethane Undercoat
This product has exceptional chemical, solvent and weather resistant qualities. Easy to apply.
TDS 452
Application: 
TDS 453
Application:

Acrylated Rubber Zinc Phosphate Undercoat
A primer designed for use on blast cleaned steel or blast cleaned zinc sprayed steel and for use under an acrylated rubber top coat. The complete system provides excellent protection under severe conditions.
TDS 293
Application: 
TDS 294
Application:

T-Wash Mordant Solution
A specially formulated acid based solution for the pre-treatment coating of new galvanised surfaces prior to application of standard paint system. This product ensures excellent paint adhesion to the surface.
TDS 116
Application: 
 

 


Suffolk show 2018
Lincs Show 2018
Royal Norfolk
Barn Paint
Antifreeze
In The Field
Off Road
Prolan
New Trade Shop
Equine
Floor
Technical Support
Bulk Storage
Lubricant Survey
Ancillary
Online Shop
Motul
Creocote Graphic
Masterfleet Graphic
Registered in England 2117373 © 2018 The Witham Group. All Rights Reserved.