Engine Lubricants

Our range of superior quality industrial lubricants for diesel and petrol engines help lower emissions, reduce maintenance costs and improve fuel economy. Fully approved for use by the Original Equipment Manufacturer (OEM), our products are made and tested to an outstanding level of performance. For clarification of the technical terms used in the product descriptions below please refer to the Technical section of this website.

Heavy Duty Engine Oils

MasterFleet Universal HD FS 10W/40
This is a remarkable universal product that will cover over 95% of all heavy duty diesel applications.  This “one oil suits all” product helps keep your ordering for a reliable, quality lubricant simple and helps eliminate the potential to put the wrong oil in your engine or any other diesel application. In addition MasterFleet Lubricant helps rationalise the range of engine oil required and potentially eliminates expensive errors. Formulated using the latest emission legislation technology this product is also ideal for engines that are required to operate within a cleaner environment such as cities and low emission zones. Meets the following performance levels: MB 228.51 & MB 228.31. E6, E7, E9, Deutz IV-10LA (Backward Compatible to DQC-111-10LA), Volvo VDS-4, (Backward Compatible to VDS-3). 

Supremol 10W/40
A Full Synthetic - Ultra High Performance Diesel Engine Oil - specifically designed to meet the stringent requirements of the latest generation Euro engines. Qualube Supremol has been developed with low sulphated ash, phosphorous and sulphur (low saps) designed to provide extended drain intervals, and minimises diesel particulate filter (DPF) plugging and protects catalytic treatment systems. Meets the following performance levels: ACEA E6,E7 & E9, API CJ-4, MB approval for MB228.51 and MB228.31, Caterpillar ECF-3 & ECF-2, MAN 3477/M3271-1, Volvov VDS-4 & VDS-3, Renault Tricks RLD-3,, Cummins CED 20081, MTU Type 3.1,MACK EO-OPP, Deutz DQC IV-10LA,Scania Low Ash, Detroit Diesel DDC 93K-218.

Supremol 5W/30
Fuel costs are the largest single operating expense of a typical European commercial vehicle fleet, making up 45% of the total annual costs. Witham has blended this new Supremol 5W/30 synthetic engine lubricant which can genuinely help reduce operating costs by providing proven new fuel economy improvement benefits whilst still maintaining the same level of engine protection as other Heavy Duty products. This product is therefore ideal for the long haul vehicle that operates in extreme climate conditions. It provides outstanding proven performance and durability as well as additional protection against corrosion, wear and tear and oxidation issues. It is designed to meet the stringent requirements of many Euro 6 engines and has been developed with low sulphated ash, phosphorous and sulphur (low saps) also giving extended drain intervals. Meets the following performance levels: MB 228.31 and MB 228.51. ACEA E6, ACEA E7, ACEA E9 specifications. API CJ-4, API SN, Deutz DQC IV-10 LA, Man 3477, Volvo VDS-3, VDS-4, MAN M3677 & Scania LDF-4, as well as many others.

Extendol FS 10W/40
This product meets the very latest increased horsepower, severe duty diesel engines and additional requirements imposed for pollution control and fuel economy, with the introduction of new engine designs. Qualube Extendol FS is formulated using modern additive technology, shear stable viscosity modifiers and fully Synthetic base stocks. Meets the following performance levels: MB 228.5 diesel engine specification and ACEA E4. ACEA E7, API CI-4, Deutz DQC IV-10, Volvo VDS-3 and Scania LDF-3.

Extendol FS 5W/30 
This is a fully synthetic heavy duty diesel engine oil formulated using the latest quality base oils and enhanced additive systems. Because of its lower viscosity it is recognised as a fuel efficient lubricant which also provides better cold starting and less wear on engines, starter motors and batteries. It also offers excellent anti-wear and corrosion protection. Meets the following performance levels: Renault VI RLD-2, Mack EO-N, Volvo VDS-3, ACEA E4, ACEA E7, DAF Extended Drain, Deutz DQC IV-10, MB 228.5, MB 235.28, MAN 3277, MTU Type 3 and Scania LDF-3.

Extremol 10W/40 
A fully synthetic mid SAPS heavy duty diesel engine oil for use in both Euro IV & Euro V engines. This product is backward compatible for use in many earlier engines as well as satisfying the requirements of many OEM’s. This product is formally approved to Volvo VDS-4 and meets the following performance levels: MB 228.31. API CJ-4, ACEA E9, Cat ECF-3 and Deutz DQC III-10-LA amongst many other credentials. 

Extremol FS 10W/30 
This is a fully synthetic, high performance, heavy duty diesel engine oil which is formulated using advanced Group III base oil technology and enhanced additive systems and manufactured to give exceptional performance whatever the conditions. This product gives constant protection against deposits that build up from fuel combustion and is ideal for use in heavy duty diesel engines in severe on and off highway applications. This product is recommended for use in vehicles fitted with advanced exhaust after treatment systems it has been developed to maximize the life of the particulate trap filter, it is backwards compatible and therefore may also be used in older engines. Qualube Extremol FS 10W30 meets a wide range of OEM and industry specifications allowing it to be used comfortably across mixed fleets and meeting the following specifications: ACEA E9, API CJ & CK-4, Volvo VDS-4 Approved, Volvo VDS-4.5, Renault RLD-4 & Deutz DQC III-10LA,Mack EO-S 4.5,MTU Type 2.1,Cummins CES 20086, Cat ECF-3, Detroit Diesel DDC 93K222, JASO (2015) DH-2, MB 228.31. 

Extremol 15W/40
A high quality heavy duty diesel engine oil, manufactured to give exceptional performance and extend drain intervals. This product is ideal for vehicles fitted with advanced exhaust after treatment systems for the reduction of particulate matter (DPFs) and/or in combination with low sulphur diesel fuel. Qualube Extremol 15w/40 meets a wide range of OEM and industry specifications, allowing it to be used across mixed fleets and is specifically formulated to the latest API CK-4 specifications which is fully backward compatible to API CJ-4: Volvo VDS-4, 4.5, Renault VI RLD 3 & 4, ACEA E7 & E9, API SN, MAN 3275, MAN 3575, Cat ECF-3, Cummins CES 20081/86, MB 228.1 and many more.

Endurasyn SS 10W/30 
A severe-duty, Semi-Synthetic based lubricant which has been developed to meet the diverse and demanding service requirements of both diesel and petrol engines. Qualube Endurasyn 10W/30 provides Longer Oil Drain intervals, resulting in lower maintenance costs. Proven engine and piston cleanliness allowing for clean burning engines with improved fuel economy. Improved engine durability providing reduced repair costs and constant protection against corrosion and rusting of engine components. Meets the following performance levels: ACEA E7, API CI-4. Volvo VDS-3, Cat ECF-2, MB 228.3.

Endurasyn SS 10W/40
A severe-duty, Semi-Synthetic based lubricant which has been developed to meet the diverse and demanding service requirements of both diesel and petrol engines. Qualube Endurasyn provides Longer Oil Drain intervals, resulting in lower maintenance costs. Proven engine and piston cleanliness allowing for clean burning engines with improved fuel economy. Improved engine durability providing reduced repair costs and constant protection against corrosion and rusting of engine components. Meets the following performance levels: ACEA E7, API CI-4. Volvo VDS-3, Cat ECF-2, MB 228.3.

Endurasyn SS 15W/40
A severe-duty, Semi-Synthetic based lubricant which has been developed to meet the diverse and demanding service requirements of both diesel and petrol engines. Qualube Endurasyn provides Longer Oil Drain intervals, resulting in lower maintenance costs. Proven engine and piston cleanliness allowing for clean burning engines with improved fuel economy. Improved engine durability providing reduced repair costs and constant protection against corrosion and rusting of engine components. Meets the following performance levels: ACEA E7, API CI-4. Volvo VDS-3, Cat ECF-2, MB 228.3.

Endurol 15W/40 
In addition to being a high quality lubricator, this oil keeps the engines clear of rust and prevents corrosion of bearings. It acts as a coolant and traps contaminants in a suspension until the oil is drained. Qualube Endurol is formulated using the strongest additive technology, the most shear stable viscosity modifiers and virgin base stocks. In today’s high speed, increased horsepower requirements, oils are under increased stress and this product meets a wide range of OEM and industry specifications allowing it to be used across mixed fleets: ACEA E7, API CI-4, API SL/CF, Volvo VDS-3, Renault RLD/RLD2, Cat ECF 2, MB 228.3, and Deutz DQC-III-10.

Eurofleet 10
This is a mineral based monograde engine lubricant which provides excellent detergent dispersant, anti-wear and anti-corrosion protection. With a proven track record in agriculture and horticulture it is developed to meet the mixed fleet applications asking for a high quality crankcase lubricant. Qualube Eurofleet is suitable for use in high output, turbocharged and normally aspirated four stroke diesel and petrol engines. This product has given many hours of trouble free service for many years. Meets API CG-4/SG, MB 228.1, MAN 271.

Eurofleet 20
This is a mineral based monograde engine lubricant which provides excellent detergent dispersant, anti-wear and anti-corrosion protection. With a proven track record in agriculture and horticulture it is developed to meet the mixed fleet applications asking for a high quality crankcase lubricant. Qualube Eurofleet is suitable for use in high output, turbocharged and normally aspirated four stroke diesel and petrol engines. This product has given many hours of trouble free service for many years. Meets API CG-4/SG, MB 228.1, MAN 271.

Eurofleet 30
This is a mineral based monograde engine lubricant which provides excellent detergent dispersant, anti-wear and anti-corrosion protection. With a proven track record in agriculture, marine and commercial applications, it is ideal for use in air cooled, marine and stationary engines where multi grade products are not acceptable. Qualube Eurofleet is suitable for use in rollers and chain drives. This product has given many hours of trouble free service for many years. Meets API CG-4/SG, MB 228.1, MAN 271.

Eurofleet 40
This is a mineral based monograde engine lubricant which provides excellent detergent dispersant, anti-wear and anti-corrosion protection. With a proven track record in agriculture and horticulture, Qualube Eurofleet is suitable for use in rollers and chain drives and often used in engines where ambient heat requires a higher viscosity. This product has given many hours of trouble free service for many years. Meets API CG-4/SG, MB 228.1, MAN 271.

Eurofleet 50
Qualube Eurofleet 50 is a fluid designed for use in certain engines and transmissions. Incorporating detergent, dispersant, anti-wear & anti-corrosion additives Qualube Eurofleet 50 meets the following specifications API CG-4/SG, MB 228.1, MAN 271.

Eurofleet 15W/40
Eurofleet 15W/40 is a Super High Performance Diesel (SHPD) engine oil that is manufactured to an approved formulation to give exceptional performance even at extended drain intervals. This is a tried and tested product that has given many years of trouble free service within the agricultural, road haulage, marine and plant hire industries. Designed to keep the engine free of rust, prevent bearings corroding it also traps contaminants and holds in suspension until the oil is drained thus helping avoid costly breakdown issues. Qualube Eurofleet 15W/40 meets a wide range of OEM and industry specifications allowing it to be used on mixed fleets. ACEA E7, API CH-4/CF, API,SJ,MTU Type 2, Volvo VDS-3, Caterpillar ECF-1a, MB 228.3, MAN 3275, Renault RLD/RLD 2, amongst others.

Eurofleet 20W/50
Eurofleet 20W/50 is a heavy duty diesel engine oil manufactured to a tried and tested standard within the agricultural, plant and road haulage industries. Also widely used in marine fleets, this products helps keep the engine free of rust, prevent bearings corroding it also traps contaminants and holds in suspension until the oil is drained thus helping avoid costly breakdown issues. Qualube Eurofleet 20W/50 meets a wide range of OEM and industry specifications allowing it to be used on mixed fleets. Meets the following performance levels: MB 228.3, API CH-4/CF/SJ, Cat ECF-1a, and MAN 3275. 

Motorcycle Engine Oil

Motorcycle Engine Oil 10W/30
Qualube MCEO 10W30 is a dedicated 4T motorcycle engine oil suitable for both water and air cooled motorcycles and All Terrain vehicles (ATV’s). Manufactured to the latest JASO T903: 2011 MA2 specification this product provides outstanding protection and performance. This product has demonstrated outstanding deposit control compared to a standard car engine oil ensuring the narrow oil ways within the engine are kept clean and clear. The needs of motorcycles and ATV’s are distinct from that of passenger car oils and one unique example is the requirement for the fluid to lubricate the gearbox. Motorcycle and ATV oil temperatures will often exceed those in cars, requiring better thermal stability to minimize oil degradation and deposit formation. Generally motorcycles and ATV’s also run at higher speeds, outputs and higher temperatures hence higher lubricity performance is vital to reduce metal to metal friction and heat generation so providing better operating temperatures.

 
 

 

 

Material Safety Data Sheet PDF TERMS AND CONDITIONSPDF DELIVERY AND RETURNSPDF PRIVACY POLICYPDF
Registered in England 2117373 © 2018 The Witham Group. All Rights Reserved.